
Project Summary
A destination resort is built around a feeling: the change of pace, the sense that everything has been looked after. That experience starts the moment a guest turns off the road, well before the front desk. A golf resort never really closes, either. Guests check in and out around the clock, residents come and go, and the drive up to the clubhouse is the first thing anyone sees. The pavement at The Legacy Golf Resort in Phoenix had aged across acres of parking, entry drives, and clubhouse approaches, and the owner needed it brought back to a resort standard without ever shutting the property down.
Diamond Solutions delivered a complete surface refresh across the resort. Crews crack-sealed nearly 49,000 linear feet, more than nine miles, then sealcoated roughly 243,000 square feet in two coats. Where the asphalt had truly failed, Diamond removed and replaced nearly 30,000 square feet to a full 4-inch depth, repaired concrete, and poured new curb and gutter. The whole property was restriped with fresh stalls, ADA stencils, and curb painting, and Diamond power-washed about 123,700 square feet of concrete walkways and paver areas so the hardscape matched the fresh asphalt.
The challenge was keeping a working resort working. Diamond built a phased plan that moved across the property one zone at a time, sealing and striping each area, holding it closed only until the paint set, and reopening it before moving to the next. Guests kept arriving, valet kept running, and residents kept parking through the entire job.



Executing the Project
PHASE 1: MAP THE WORK BEFORE ANYONE MOVES A CAR
Diamond built a color-coded phasing plan for the whole property and shared it in Vision, so the resort could see exactly which zones would close, in what order, and when each would reopen. A resort with this much traffic can't absorb surprises; the plan made the sequence clear before a single cone went out.
PHASE 2: RIGHT-SIZED SCOPE, SURFACE BY SURFACE
Not every lot needed the same work. Diamond removed and replaced the asphalt only where it had failed, full-depth, and protected the rest with crack sealing and two coats of sealcoat. Concrete and curb were repaired where needed, and the paver and walkway areas were power-washed, so every surface on the property came back to one standard.
PHASE 3: CLOSE A ZONE, FINISH IT, REOPEN IT
Crews worked the property zone by zone. Each area was cleared, sealed, allowed to cure, and striped, then reopened, usually by the next morning, before the next zone came down. When weather or a lot full of cars slowed a phase, Diamond adjusted the schedule with the resort rather than forcing it, so guest access was never cut off across the whole property at once.
PHASE 4: STAND BEHIND THE DETAILS
Diamond coordinated daily with the on-site team, worked around vehicles that couldn't be moved, and handled the small things, like repairing a parking stop touched during the work, so the finished property met a resort standard end to end.


The Result
Diamond delivered a complete pavement and surface refresh across an entire destination resort, nearly 243,000 square feet of sealcoating, more than nine miles of crack sealing, full-depth asphalt repair, concrete and curb work, a full restripe, and 123,700 square feet of power-washed hardscape, without ever closing the property. The resort came away with clean, black, freshly striped drives and lots, backed by a Diamond warranty, and a first impression that matches the experience inside.
For a property where the arrival is part of the stay, that's the whole point: the work gets done, the standard goes up, and the guests never have to notice it happened.
Schedule a Meeting With Our Team.
Plan pavement work without slowing down dealership operations.
Talk with a Diamond account executive about your dealership locations, upcoming pavement needs, and how to plan work around daily operations.
Call Us Now at 980-998-0530










